Home › Materials
Six material families held across three warehouses in Klang — over 2,000 tons of ready stock and more than a thousand sizes. No minimum order, cut to the size your job needs, with a Mill Test Certificate on every delivery.
The workhorse of general engineering. Carbon steel covers forged flanges and fittings through to machined shafts and general fabrication, while alloy grades add chromium, molybdenum and nickel for the strength, hardenability and fatigue resistance that shafts, gears and highly stressed parts demand.
E STEEL SDN BHD holds these grades as round bar, plate and flat bar, cut to your length on our in-house bandsaws. Every delivery ships with a Mill Test Certificate.
Our widest category. E STEEL SDN BHD supplies austenitic, ferritic, martensitic, precipitation-hardening and duplex stainless steels across the ASEAN market — matched to the corrosion, temperature and strength conditions your part will actually see.
Held as plate, sheet, round bar, flat bar and shim, and cut to size with no minimum order quantity.
Tool steel is chosen by the job it has to survive: cold work grades for blanking and forming, hot work grades for die casting and forging, and plastic mould grades where surface finish and polishability decide the quality of the moulded part.
We stock pre-hardened mould steel that machines straight from the bar with no heat treatment, plus precision ground flat stock held to tight tolerance.
Nickel alloys and titanium are normally a three-month import. E STEEL SDN BHD holds them in ready stock in Klang — the grades that oil and gas, petrochemical, marine and medical customers specify when ordinary stainless will not survive the service conditions.
Available as round bar, plate, sheet, forged ring and flange, cut to size with full material traceability.
Plate for construction, shipbuilding and heavy equipment — from general structural grades, through classification-society marine plate, to abrasion resistant wear plate for buckets, liners and chutes.
Our vertical bandsaws cut large, thick plate with clean edges and minimal waste, so you order the piece your job needs rather than the whole sheet.
Where a steel would gall, seize or conduct too poorly, a copper alloy is the answer. Nickel aluminium bronze carries load and resists seawater corrosion in marine and pump service, while tellurium copper machines freely and keeps high electrical conductivity.
Supplied as round bar, machined sleeve and plate, cut to your requirement.
Send your specification and we will confirm stock availability, cutting and pricing. Enquiries received before 6:00 PM on in-stock items are answered the same business day.
