Spring steel shim and strip: SS301 full-hard stainless and C1095 (SK5) blue temper shim, supplied from coil in the thickness you need. No MOQ, shipped globally from Malaysia.
Spring shim is thin, hard strip used for shimming, springs, clips and precision spacers. E STEEL SDN BHD supplies stainless SS301 and carbon C1095 blue temper shim, and sources special requests through our supplier network with minimum inventory.
301 Stainless Steel Shim ,Spring Shim SUS301
SS301 With high quality spring steel has a Rockwell hardness range of Hrc 48/51.
E STEEL SDN BHD have good partnership with our suppliers worldwide,this enable us to operate with minimum inventory and still be able to fulfill customer’s special request with short lead time. ( Air freight Shipment )
| Alloy | UNS Number | SAE Number |
|---|---|---|
| SUS 301 | S30100 | 30301 |
| SUS 301 is an austenitic stainless steel with a nominal composition of 17 percent chromium and 7 percent nickel. The high strengths of this grade of steel in the six available conditions or tempers, its resistance to atmosphere corrosion and its bright, attractive surface make it an excellent choice for decorative structural applications. Automobile molding and trim, wheel covers, conveyor belts, kitchen equipment, roof drainage systems, hose clamps, springs, truck and trailer bodies, railway and subway cars are some of the major applications for this versatile grade. By varying the chemical composition within the limits set by the ASTM specifications and by temper rolling, a broad range of magnetic and mechanical properties can be obtained for a variety of applications. |
|---|
| SS301 is resistant to a variety of corrosive media. However, the corrosion properties are not as good as the 18-8 chromium-nickel steels. Its susceptibility to carbide precipitation during welding restricts its use in many applications in favor of SUS 304 or SUS 304L. |
|---|
| Melting Point | Density | Specific Gravity | Modulus of Elasticity in Tension |
|---|---|---|---|
| 2550-2590° F 1399-1421° C | .29 lb/in³ 8.03g/cm³ | 8.03 | 28 X 106 psi 193 Gpa |
| Alloy | C | Mn | P | S | Si | Cr | Ni | Mo | Cu | N | Other |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 301 | .15 | 2.00 | .045 | .030 | .75 | 16.00-18.00 | 6.00-8.00 | .75 | .75 | .10 | – |
All values are maximum values unless otherwise specified. Values are derived from applicable AMS and ASTM specifications.
| MECHANICAL PROPERTIES | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Grade | Code | As Rolled | After Low-temperature Annealing | Bendability | ||||||
| Hardness | Tensile strength | Elongation | Spring deflection limit | Hardness | Tensile strength | Elongation | Spring deflection limit | |||
| HV | N/mm2 | % | N/mm2 | HV | N/mm2 | % | N/mm2 | |||
| SUS301 | SEH | ≥ 530 | ≥ 1810 | – | (≥ 650) | ≥ 550 | ≥ 1940 | – | (≥ 880) | – |
| EH | ≥ 490 | ≥ 1570 | – | (≥ 590) | ≥ 505 | ≥ 1665 | – | (≥ 785) | – | |
| H | ≥ 430 | ≥ 1320 | – | (≥ 490) | ≥ 440 | ≥ 1400 | – | (≥ 655) | *4t R90° bending available | |
| 3/4H | ≥ 370 | ≥ 1130 | ≥ 5 | (≥ 390) | ≥ 380 | ≥ 1175 | ≥ 4 | (≥ 540) | 2.5t R90° bending available | |
| 1/2H | ≥ 310 | ≥ 930 | ≥ 10 | (≥ 315) | ≥ 315 | ≥ 960 | ≥ 8 | (≥ 390) | 2t R90° bending available | |
| 1/4H | ≥ 250 | ≥ 860 | ≥ 25 | – | ≥ 253 | ≥ 880 | ≥ 20 | – | 1t R90° bending available |
SUS301 and SUS304 are both austenitic stainless steels, so there is very little difference in their outward appearance.
The difference between them lies in their chemical composition, particularly their carbon, chromium, and nickel content. SUS301 is 0.15C17Cr7Ni, while SUS304 is 0.08C18Cr8Ni.
This difference actually affects the mechanical properties of the steel after rolling, for example, SUS301 can be made stronger than SUS304 by rolling.
SUS301 is recommended for applications that require elasticity, due to its ability to acquire a high degree of strength when rolled.
SUS304 is recommended for applications that require good workability and corrosion resistance, while SUS304L is recommended for those that require resistance to intergranular attack
E STEEL SDN BHD have good partnership with our suppliers worldwide,this enable us to operate with minimum inventory and still be able to fulfill customer’s special request with short lead time. ( Air freight Shipment )
Shall you have inquiry on Alloy steels, Stainless steels, Nickel Alloy & Titanium, please do not hesitate to contact us.
What is c1095 steel?
SK5 / C1095 Blue Tempered Spring Steel, 95 Carbon Spring Steel , Spring Steel , Strip Steel , Shim Steel
SPECIFICATIONS AND USE
Precision Brand Blue Tempered Spring Steel Shim is a C1095 high carbon, hardened and tempered product to meet the most exacting requirements. This high quality spring steel has a Rockwell hardness range of C 48/51. This material is preferred by tool and die makers for low templates and shim applications where toughness and low fatigue values are required. The blue surface is ideal for scribing layouts. Recommended for various types of coiled and flat mechanical springs, such as those used in tuning devices, electrical assemblies, steel tapes and rules.
Hardened and tempered to the most exacting requirements for your critical applications. Pre-tempered spring steel can withstand mild forming, but when yours finished piece is a blanked part, it is usually the only economical raw material to consider. Its uses include doctor blades, all types of flat springs, motor springs, valves, steel tapes, reeds and numerous other applications. Min Thickness from 0.0127mm to 2mm.
What is the composition of AISI 1095 steel?
C1095 ANALYSIS: C .90/1.04 Mn .30/.50 P .025 max. S .050 max Si.15/.30
C1095 HARDNESS: Rockwell C 48-51
C1095 APPLICATIONS: Ignition vibrator springs, springs for timing devices, springs for
Electrical & Electronic applications, tapes, & rules
FINISH: Deep blue, polished
Blue Tempered Steel & Polished Strip Steel
Hardened and Tempered to meet the most exacting requirements; Polished, Edged and Blued Precision Brand Blue Tempered Spring Steel. May be depended upon for top quality coil after coil. Every single coil on Precision’s shelves has been thoroughly tested on receipt from mill and prior to stocking. This is perhaps the most universally used of all tempered spring steels. Recommended for various types of coiled and flat mechanical springs such as ignition vibrator springs, springs for timing devices, springs for the electrical and electronic field, steel tapes, rules, etc.
TEMPERED STORAGE One of the largest stocks of Tempered Spring Steel Strip available. Hundreds of sizes of Tempered and Polished are regularly stocked, both narrow sizes with dressed edges and wide sizes for slitting purposes. Stock sizes range from 1/8” wide to 12 3/8” wide. Also available 24 wide on request.
Bandsaw technology ensures minimal kerf loss and clean, burr-free edges.
Cut to the size your job needs. No minimum order quantity.
Mill test reports (MTRs) for traceability.
Fast air and sea shipping with real-time tracking.
No MOQ, shipped globally from Malaysia. Send us the size and we will cut it.
