Description
1.2436 / D6 / XW5 / SKD2 Cold Work Tool Steel
Standards | DIN | AISI | JIS | ГОСТ |
X210CrW12 | 1.2436 | D6 | SKD2 | X12B |
Chemical composition (typical analysis in %)
C | Si | Mn | P | S | Cr | W |
2.00-2.30 | 0.10-0.40 | 0.15-0.45 | ≤0.030 | ≤0.030 | 11.0-12.0 | 0.60-0.80 |
________________________________________________________________________
Steel properties : | High carbon high chromium tool steel in flat and round bar. This is a tool steel grade offering very high wear resistance with edge holding quality. It is an air hardening alloy tool steel with excellent resistance to wear and abrasion. As a high carbon high chromium tool steel 1.2436 has good through hardening properties and dimensional stability combined with high resistance to tempering.
|
________________________________________________________________________
Applications :
|
Woodworking tools, thread rolling dies, deep drawing and cold extrusion tools, measuring tools, scraping and trimming tools, deburring tools, moulds for abrasive plastics. |
________________________________________________________________________
________________________________________________________________________
Delivery condition : | Soft annealed to max. 255 HB |
- Mechanical Properties
Properties | Metric | Imperial |
Compressive strength | 1320 MPa | 191000 psi |
Modulus of elasticity | 194 GPa | 28100 ksi |
Hardness, Rockwell C | 46 | 46 |
AISI/SAE D6 Tool Steel Heat Treatment
Soft annealing ℃ | Cooling | Hardness HB | |||||
800 – 840 | Cool sloly in furnace | max. 255 | |||||
Hardening from ℃ | in | Hardness after quenching HRC | |||||
940 – 980 | oil, air or warm bath | 64 – 66 | |||||
960 – 1000 | 500 – 550 C | 64 – 66 | |||||
Tempering | ℃ | 100 | 200 | 300 | 400 | 500 | 600 |
HRC | 63 | 62 | 60 | 58 | 56 | 48 |
We are Malaysia Stainless Steel supplier with full range of Stainless Steel sheets, stainless steel round bar , stainless steel rod, stainless steel plate, 300 Series stainless steel , 400 series stainless steel , 253ma, sus301, sus304, sus304l, sus309, sus310, sus316ti, sus317, sus321, sus403 , sus410 , sus420 , sus430, sus431 , sus440c , sus630 , sus904L, s31803 , s32750 , s32760, s31254, s320j4l, Nitronic30, Nitronic50 , Nictronic60