HARDOX 500 is an abrasion resistant plate with a hardness of 500 HBW, intended for applications where demands are
imposed on abrasi on resistance.
Applications : Crushers, sieves, feeders, measuring pockets, skips, cutting edges, conveyors, buckets,knives, gears, sprockets, etc.
5/32 – 11/4 inch : 470 – 530
(11/4) – 35/32 inch : 450 – 540
Testing temperature :- 40 °C
Impact energy Charpy-V, longitudinal : Ft-lbs 22 , 30(J)
Heat Treatment and Fabrication
HARDOX 500 has obtained its mechanical properties by quenching and when necessary by means of subsequent tempering. The properties of the delivery conditon can not be retained after exposed to service or preheating temperatures above 480°F (250°C).HARDOX 500 is not intended for further heat treatment.
For information concerning welding and fabrication, see our brochures on www.hardox.com or consult our Technical Customer Service.
Appropriate health and saftey precautions must be taken when welding, cutting,grinding or otherwise working on the product. Grinding, especially of primer coated plates, may produce dust with high particle concentration.
|Grade||Mechanical Property||Charpy V Impact Test|
|HADOX® 500||HBW Thickness/Mpa||Elongation||Degree||longitudinal|
E Steel Sdn Bhd are Malaysia steel supplier/stockist providing raw materials to the wide arrays of engineering industries/sectors.
We supply full range of Carbon Steel sheets, Carbon steel round bar , Carbon steel rod, Carbon steel plate, Alloy steel , hardened steel , Case Hardened Steel ,Special Steel ,Tool Steel ,Case harden Steel
Grades : ASTM a105, s45c , s50c, AISI4140, AISI4340, AISI4130, 5919, 6587, ASSAB709, ASSAB705