Description
301 Stainless Steel Technical Data Sheet
Alloy | UNS Number | SAE Number |
SUS 301 | S30100 | 30301 |
What is SUS301 material?
SUS 301 is an austenitic stainless steel with a nominal composition of 17 percent chromium and 7 percent nickel. The high strengths of this grade of steel in the six available conditions or tempers, its resistance to atmosphere corrosion and its bright, attractive surface make it an excellent choice for decorative structural applications. Automobile molding and trim, wheel covers, conveyor belts, kitchen equipment, roof drainage systems, hose clamps, springs, truck and trailer bodies, railway and subway cars are some of the major applications for this versatile grade. By varying the chemical composition within the limits set by the ASTM specifications and by temper rolling, a broad range of magnetic and mechanical properties can be obtained for a variety of applications. |
Is SS 301 corrosion resistance?
SS301 is resistant to a variety of corrosive media. However, the corrosion properties are not as good as the 18-8 chromium-nickel steels. Its susceptibility to carbide precipitation during welding restricts its use in many applications in favor of SUS 304 or SUS 304L. |
sus301 material PROPERTIES
Melting Point | Density | Specific Gravity | Modulus of Elasticity in Tension |
2550-2590° F 1399-1421° C |
.29 lb/in³ 8.03g/cm³ |
8.03 | 28 X 106 psi 193 Gpa |
301 stainless steel chemical composition
Alloy | C | Mn | P | S | Si | Cr | Ni | Mo | Cu | N | Other |
301 | .15 | 2.00 | .045 | .030 | .75 | 16.00-18.00 | 6.00-8.00 | .75 | .75 | .10 | – |
All values are maximum values unless otherwise specified. Values are derived from applicable AMS and ASTM specifications.
MECHANICAL PROPERTIES | ||||||||||
Grade | Code | As Rolled | After Low-temperature Annealing | Bendability | ||||||
Hardness | Tensile strength | Elongation | Spring deflection limit | Hardness | Tensile strength | Elongation | Spring deflection limit | |||
HV | N/mm2 | % | N/mm2 | HV | N/mm2 | % | N/mm2 | |||
SUS301 | SEH | ≥ 530 | ≥ 1810 | – | (≥ 650) | ≥ 550 | ≥ 1940 | – | (≥ 880) | – |
EH | ≥ 490 | ≥ 1570 | – | (≥ 590) | ≥ 505 | ≥ 1665 | – | (≥ 785) | – | |
H | ≥ 430 | ≥ 1320 | – | (≥ 490) | ≥ 440 | ≥ 1400 | – | (≥ 655) | *4t R90° bending available | |
3/4H | ≥ 370 | ≥ 1130 | ≥ 5 | (≥ 390) | ≥ 380 | ≥ 1175 | ≥ 4 | (≥ 540) | 2.5t R90° bending available | |
1/2H | ≥ 310 | ≥ 930 | ≥ 10 | (≥ 315) | ≥ 315 | ≥ 960 | ≥ 8 | (≥ 390) | 2t R90° bending available | |
1/4H | ≥ 250 | ≥ 860 | ≥ 25 | – | ≥ 253 | ≥ 880 | ≥ 20 | – | 1t R90° bending available |