Description
We are Malaysia Stainless Steel supplier with full range of Stainless Steel sheets, stainless steel round bar , stainless steel rod, stainless steel plate, 300 Series stainless steel , 400 series stainless steel , sus301, sus304, sus304l, sus309, sus310, sus316ti, sus317, sus321, sus403 , sus410 , sus420 , sus430, sus431 , sus440c , sus630 , s31803 , s32750 , s32760, s31254, s320j4l, Nitronic30, Nitronic50 , Nictronic60
OUR MOTTO : ” WHY BUY A FULL BAR OR SHEET WHEN YOU JUST NEED A SMALL VOLUME?
Our specialty is to provide wide range of stainless steel with no minimum order
Stainless Steel 317L ( S31703 ) is the low-carbon derivative of SS 317 ( S31700 ). The metal maintains its high strength and strong corrosion resistance; however, the carbon content does have several effects. SUS317L has greater strength under welding; its products are stronger.
Like SUS317, stainless steel 317L does not respond or harden from heat treatments. When hot working, the metal should be heated ideally within the range of 2100-2300°F. Dropping below 1700°F will cause the metal to be unresponsive. For these reasons, SS317L is effective in high temperature areas that experience high rates of chemical corrosion, creep, and stress-to-rupture.
SS317L is commonly utilized in chemical environments. It has shown itself to be effective in conditions where acids are present, such as acidic chloride. The metal is resistant to corrosion from such substances. As such, it is common to find 317L stainless steel in equipment used in pulp and paper mills. The acidic environment requires a strength, corrosion resistant metal.
It is possible for grades ss317 and ss317L to become dually certified.
| CHEMICAL ANALYSIS (%WEIGHT) | |||||
| C | Cr | Ni | Mo | N | Mn |
| < 0,030 | 18 | 12,5 | 3,1 | 0.1 | 2.0 |
| PROPERTIES | ||||||||||
| 0,2 Y.S. – Rp 0,2min ASTM / EN | 0,2 Y.S. – Rp 0,2(2)typical value | UTS – Rm min ASTM / EN | UTS – Rm(2)typical value | EI-A(1)% | PREN(4) | Hardness | ||||
| MPa | Ksi | MPa | Ksi | MPa | Ksi | MPa | Ksi | |||
| 220 | 32 | 318 | 46 | 520 | 75 | 599 | 87 | 40 | 29 | 217HB |
Resistance to Corrosion: Types SUS 316, SUS 316L, SUS 317 and SUS 317L are more resistant to atmospheric and other mild types of corrosion than Types SUS302, SUS304 and SUS304L. In general, media that do not corrode Types SUS 302, SS304, and SS304L, will not attack these molybdenum-containing grades. One known exception is highly oxidizing acids such as nitric acid to which the molybdenum-bearing stainless steels are less resistant.
Features : • Excellent corrosion resistance
- Higher creep, stress-to-rupture and tensile strength at elevated temperature
- Able to maintain clean surfaces
Comparison Chemical Composition %
| Element | Percent by Weight
Maximum Unless Range is Specified |
|||
| SUS316 | SUS316L | SUS317 | SUS317L | |
| Carbon | 0.08 | 0.03 | 0.08 | 0.03 |
| Manganese | 2.00 | 2.00 | 2.00 | 2.00 |
| Silicon | 0.75 | 0.75 | 0.75 | 0.75 |
| Chromium | 16.00 | 16.00 | 18.00 | 18.00 |
| 18.00 | 18.00 | 20.00 | 20.00 | |
| Nickel | 10.00 | 10.00 | 11.00 | 11.00 |
| 14.00 | 14.00 | 15.00 | 15.00 | |
| Molybdenum | 2.00 | 2.00 | 3.00 | 3.00 |
| 3.00 | 3.00 | 4.00 | 4.00 | |
| Phosphorus | 0.045 | 0.045 | 0.045 | 0.045 |
| Sulfur | 0.030 | 0.030 | 0.030 | 0.030 |
| Nitrogen | 0.10 | 0.10 | 0.10 | 0.10 |
| Iron | Bal. | Bal. | Bal. | Bal. |
Comparison Mechanical Properties
| Property | SUS 316 (S31600) | SUS 316L (S31603) | SUS 317 (S31700) | SUS 317L (S31703) |
| Yield Strength 0.2% Offset psi
mpa |
30,000
205 |
25,000
170 |
30,000
205 |
30,000
205 |
| Ultimate Tensile Strength
psi mpa |
75,000
515 |
70,000
485 |
75,000
515 |
75,000
515 |
| Percent Elongation in 2 in. or 51mm | 40 | 40 | 35 | 40 |
| Hardness, Max. Brinell
RB |
217
95 |
217
95 |
217
95 |
217
95 |
