A105 steel APPLICATIONS
Typical applications for this grade of steel include pipes, valves and flanges.
SHAPES AND SIZES
E Steel Sdn Bhd supplies A105 steel Round bar in a variety of sizes ranging from 3/4”- 12”.
Heat treatment is not required except for ASTM A 105 carbon steel forging. However, there are some exceptions that will require heat treatment to improve its mechanical properties for better application.
The typical heat treatment conducted for A105 carbon steel forgings includes annealing(A), normalizing(A), normalizing and tempering(NT), quenching and tempering(QT). Especially, normalizing at approximate 950°C for 2.5 hours is often required by many clients to eliminate possible internal stress in the forgings. These materials are usually marked as “ASTM A105N”.
|ASTM A105 & ASTM A350-LF2 DUAL CERTIFIED||A Special Quality Fine Grain Carbon-Manganese Steel for Piping Components|
|ASTM A105 & ASTM A350-LF2 DUAL CERTIFIED||Mechanical Properties|
|Tensile Strength Min, psi||70,000||70,000-95,000||70,000-95,000|
|Tensile Strength Min, N/mm²||485||485-655||485-655|
|Yield Strength Min, psi||36,000||36,000||36,000|
|Yield Strength Min, N/mm²||250||250||250|
|Reduction of Area (%)||30||30||30|
|Hardness, maximum||187||15/12 ft-lbs||15/12 ft-lbs|
|CVN at -50℉||20/16 joules||20/16 joules|